SERIES: OJ-8500X-ENT Setup Required

OmniJet Pro 8500X Multifunction

Enterprise Workgroup Color Laser MFP

Detected Host OS: Windows 11 Pro (64-bit)

Device Endpoint: 192.168.1.240 (WSD)

MAC Address: 00:1B:63:84:45:E6

Active Driver Build: v4.18.02.9012 (WHQL)

SNMP Supply Telemetry OID: 1.3.6.1.2.1.43

Cyan DRM Warn

Magenta 100%

Yellow 100%

Black 100%

SHA-256 Kernel Driver Signing

All OmniPrint Universal Print Drivers (UPD) are digitally signed for Windows Defender SmartScreen and IPsec environments.

1 Device & OS Configuration

2 Driver & Spooler Verification

3 Deployment Status

OmniPrint Smart Setup & Driver Deployment

Verify your detected hardware model, target operating system, and network transport protocol to deploy the required PCL6 / PostScript driver suite.

Hardware Model or Serial Number

✓ Verified

Detected Operating System

Driver Architecture Package

Transport & Port Provisioning Method

Network IP / Ethernet

Standard TCP/IP RAW Port 9100 & WSD discovery on local subnet.

192.168.1.240

802.11ax Wireless

Auto-provision SSID credentials and mDNS/Bonjour multicast.

WPA3-Enterprise

USB 3.0 High-Speed

Direct DOT4 IEEE-1284.4 virtual USB print class interface.

Port: USB001

OmniPrint_UPD_PCL6_x64_v4.18.02.cab 148.4 MB

Includes Smart Spooler Service, Bi-Directional SNMP Monitor, and OCR Scan Twains.

ERR_SPOOL_0x800F020B Sub-Code: IPSEC_RAW_PORT_9100_LOCKED

Driver Installation Halted — Print Spooler & IPsec Port Conflict

The OmniPrint Universal PCL6 driver package could not bind to TCP Port 9100 (RAW Bi-Directional). This typically occurs when a local endpoint firewall blocks unmanaged WSD print monitors, or a corrupted registry key exists under HKLM\SYSTEM\CurrentControlSet\Control\Print\Monitors.

Component Telemetry & Fault Trace Log ID: #SP-8500X-FAIL

WSD Discovery & ICMP Echo Host 192.168.1.240 responded in 2.4ms

Passed

TCP Port 9100 (JetDirect / RAW Spool) SYN packet dropped by local print provider policy

Blocked (0x800F020B)

Bi-Directional SNMP Supply Handshake Cyan Toner ECC Security Chip failed cryptographic challenge

DRM Timeout

Recommended Remediation Actions

KB Article: KB-904182

OmniJet Pro 8500X Multifunction

OmniPrint Smart Setup & Driver Deployment

Configuring OmniJet Pro 8500X Environment...

Driver Installation Halted — Print Spooler & IPsec Port Conflict

OmniPrint Network & SNMP Packet Analyzer

Offline CAB / INF Driver Repository

Rajesh K.